Ultra-Bond primers can provide many benefits including proper bonding to the primary substrate, asphalt bleed blocking, moisture drive blocking, rust inhibiting, or enhancing solar gain on colder substrates.
Ultra-Bond primer can improve spray foam performance over a wide range of temperatures and roof deck conditions.
Foam Primers
Ultra-Bond 10 is a waterborne modified acrylic neoprene asphalt primer specifically designed as a substrate primer before the application of spray polyurethane foam.
Single Ply Membrane Primers
Low viscosity, pre-treat for black EPDM roofs prior to power washing and applying roof coatings.
Built-up Concrete Primer
Yellow, general purpose, two-component (4:1), water-based epoxy primer with unique penetrating sealant and rust inhibiting properties.
Foam Primers
Ultra-Bond 16 is a waterborne modified, single component, acrylic primer specifically designed to provide maximum adhesion over acrylic coated polyurethane foam. Ultra-Bond 16 can be used as a primer over existing acrylic coated roofs prior to the application of a new layer of acrylic top coat.
Foam Primers
Ultra-Bond 25 is a waterborne modified acrylic primer specifically designed as bleed blocking primer over modified bitumen and asphalt BUR roofs prior to the application of a new layer of Acrylic or Silicone top coat.
Foam Primers
Ultra-Bond 30 is a ready to use low viscosity waterborne modified acrylic primer/sealer that develops a tenacious bond to existing cementitious roof substrates. Ultra-Bond 30 is especially suited as a sealer to be used in combination with Ultra-Flex 1000 for repair and recoat over cementitious topped spray foam roofs.
Metal Primers
Ultra-Bond 40 is a water based, acrylic-metal primer for steel surfaces. Ultra-Bond 40 is fast drying, VOC (less than 100 gms./liter), and rust inhibitive. Ultra-Bond 40 can be used with all Ultra-Flex Acrylic, Ultra-Guard Silicone, and Ultra-Thane Roof Foam systems. Ultra-Bond 40 is an interior and exterior metal maintenance primer that is free of heavy metal hazards.
Metal Primers
Ultra-Bond 40 AB is designed to improve adhesion properties of Ultra-Bond 40 Primer to difficult substrates. Specifically used for Stainless Steel & Aluminum surfaces prior to SPF or Roof coatings applications.
Metal Primers
High-solids, red-oxide alkyd metal primer for steel surfaces that is fast drying, VOC (less than 340 gms./liter), and rust inhibitive.
Metal Primers
Two-component (1:1), liquid-applied, solvent-based epoxy-polyamide primer with enhanced bonding characteristics to ferrous and galvanized metal.
Metal Primers
GC Ultra-Bond 80 SC is a two component, liquid applied, epoxy-polyamine primer with enhanced bonding characteristics as an intercoat. GC Ultra-Bond 80 SC is designed to be in compliance with SCQAMD air quality standards.
Single Ply Membrane Primers
Two-component (1:1), high-solids, liquid-applied aromatic polyurethane with enhanced bonding characteristics over existing polyurethane coatings, PVC, and TPO membranes.